Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
•
You can use the soft starter 2 at drilling start
Drill using an even forward feed. Do not over-
load the machine.
•
The leaking water should be milky and not
clear.
•
Always loosen the locking lever 13 when
drilling.
•
After drilling switch off the machine and shut
off the water tap. Lift the machine with feed
lever 10 and secure with locking lever 13.
Removing the drilling core
•
Break off the drilling core and remove.
OVER HEAD DRILLING
DANGER: When drilling "over" head
always secure the drill stand with
the assembly.
DANGER: When drilling "over" head,
always use a water collecting ring
and a industrial wet-type vacuum
cleaner!
Mounting the water collecting ring
•
Attach the mounting brackets 27 on the base
plate adjusting screws 23.
•
Push the water collecting ring 29 between
both bracket parts and press it firmly against
the material to be drilled.
•
Tighten locking screws 24.
•
Connect a industrial wet-type vacuum
cleaner.
•
When using the water collecting ring,
attach a protective cover 28 onto it and drill
through. Remove te drilled part of the cover
from the core bit.
TRANSPORT AND STORAGE
CAUTION: Danger of injury and
damage! Pay attention to the
weight of the appliance when
transporting it.
•
Clean the machine and remove the drilling
dirt.
•
Transport the machine and core bit sepa-
rately.
•
Blow out remaining water from hose and
machine when it freezes.
20
OPERATING MANUAL KARAT® 350
KARAT
®
•
This appliance may only be stored inside a
building.
MAINTENANCE AND CARE
Always keep the machine and cooling air vents
free and clean. It must always be kept in a dry,
frost-free place.
REPLACEMENT PARTS
If – in spite of meticulous manufacturing and test-
ing processes – the device breaks down, have it
serviced by a B+BTec Service.
ENVIRONMENTAL
PROTECTION
law, broken and unserviceable electric tools must
be collected separately and submitted to an envi-
ronmentally sound recycling facility. Ensure that
your used device is returned to your dealer or
obtain information about a local authorised col-
lection and disposal system. Ignoring this EU
directive can have potential effects on the envi-
ronment and your health!
INFORMATION ON NOISE
Typically the A-weighted noise levels of the prod-
ucts are:
Karat 350
Wear ear protection!
•
The declared noise emission value(s) have
been measured in accordance with a stand-
ard test method and may be used for com-
paring one tool with another;
350
Do not dispose of this device in
household waste! According to Euro-
pean Directive 2012/19/EU on waste
electrical and electronic equipment
and its implementation in national
L
: Sound
L
: Sound
wa
pa
power
pressure
level
level
EN 62841-1
EN-62841-
3-6
88 dB (A)
98 dB (A)
L
+ L
=
wa
pa
+ 13 dB (A)
Advertenties
Inhoudsopgave
