Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slip-
pery handles and grasping surfaces do not
allow for safe handling and control of the tool
in unexpected situations.
5) Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) For power tools with type Y attachment,
where a specially preparde cord is needed
to replace the cord: if the supply cord of this
power tool is damaged, it must be replaced
by a specially preparded cord available
through a qualified service facilty.
KARAT
®
350
SPECIAL TOOLS SAFETY
WARNINGS
Diamond drill safety warnings
a)
When performing drilling that requires
the use of water, route the water away
from the operator's work area or use a
liquid collection device. Such precautionary
measures keep the operator's work area dry
and reduce the risk of electrical shock.
b) Operate power tool by insulated grasping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Wear hearing protection when diamond
c)
drilling. Exposure to noise can cause hearing
loss.
d) When the bit is jammed, stop applying
downward pressure and turn off the tool.
Investigate and take corrective actions to
eliminate the cause of the bit jamming.
e) When restarting a diamond drill in the
workpiece check that the bit rotates freely
before starting. If the bit is jammed, it may
not start, may overload the tool, or may cause
the diamond drill to release from the work-
piece.
When securing the drill stand with
f )
anchors and fasteners to the workpiece,
ensure that the anchoring used is capable
of holding and restraining the machine
during use. If the workpiece is weak or
porous, the anchor may pull out causing the
drill stand to release from the workpiece.
g) When securing the drill stand with a
vacuum pad to the workpiece, install the
pad on a smooth, clean, non-porous sur-
face. Do not secure to laminated surfaces
such as tiles and composite coating. If the
workpiece is not smooth, flat or well affixed,
the pad may pull away from the workpiece.
Working safely with this machine is possible
only when the operating and safety informa-
tion are read completely and the instruc-
tions contained therein are strictly followed.
Before using for the first time, ask for a prac-
tical demonstration.
OPERATING MANUAL KARAT® 350
GB
15
Advertenties
Inhoudsopgave
