Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ERROR CODES
These error codes are for guidance only and all faults should be diagnosed and
repaired by a qualified technician.
Display
F3 – F8
Temperature sensor failure
Temperature sensor of the IGBT
F9 – FE
failure
E1 / E2
Abnormal supply voltage
E3 / E4
Abnormal temperature
E5 / E6
Bad induction hob heat radiation.
USING THE OVEN
Before operating the oven, use a slightly damp cloth to carefully wipe the inner
cavity wall. Clean the racks and tray and in warm soapy water before using. Rinse
thoroughly.
Slide the rack/tray between the guide bars of the shelf support rails in the oven,
and push it to the end.
In case the rack and tray are inserted together, lay the rack over the tray.
Possible causes
Possible solution
Contact the store where you have
purchased the appliance.
Contact the store where you have
purchased the appliance.
Inspect whether power supply is
normal and then turn the hob on.
Inspect the cookware.
Restart after the induction hob
cools down.
71
Advertenties
Hoofdstukken
Inhoudsopgave
