Advertenties
Beschikbare talen
Beschikbare talen
GB
Connection
The RolloTec
on the left.
The RolloTec
acc. with DIN 49073 (deep box recommended).
The connecting terminals of the insert must be at the bottom.
The attachment
The electrical contact is established by the connector
The additional contacts
insert for connection of a sensor cable. The sensor itself is connected by means of
screw terminals.
16
®
insert without extension input is connected as shown in the figure
®
louver-blind/shutter control insert
is installed in a mounting box in
is plugged into the insert together with frame
.
.
in an attachment with sensor input are introduced into the
GB
Combinations between RolloTec
®
insert without extension input /
attachment
The RolloTec
®
insert without extension input can at present be used in
combination with the following attachments:
• RolloTec
®
pushbutton
without sensor input
with sensor input
• RolloTec
®
radio control pushbutton
without sensor input
with sensor input
• RolloTec
®
memory pushbutton
without sensor input
with sensor input
• RolloTec
®
clock timer attachment module Easy
• RolloTec
®
clock timer attachment module
without sensor input
with sensor input
The functions offered by the RolloTec
®
insert without extension input when used in
combination with the above attachments are described in the attachment operating
instructions.
order. no. 1750 ..
order. no. 1751 ..
order. no. 1758 ..
order. no. 1759 ..
order. no. 1756 ..
order. no. 1757 ..
order. no. 1762 ..
order. no. 1754 ..
order. no. 1755 ..
17
Advertenties
