Advertenties
Beschikbare talen
Beschikbare talen
C
Error messages and what to do
The washing machine is equipped with a self-diagnostic system that provides the error
code using the wash cycle indicator lights. The most common error codes are listed in the
table below.
Fault code
Er 01
Er 02
Er 03
Er 04
All manuals and user guides at all-guidesbox.com
Useful information
Possible fault
The machine
door is not closed
properly.
The pressure or
water level inside
the machine may
be low.
The pump or the
pump's electrical
connection is
faulty or the
drain pump filter
is clogged.
There is too
much water in
the machine.
35
Action
Close the door until you hear a click.
If the machine continues to indicate
an error, turn the machine off and
unplug it. Then immediately contact
the nearest authorised technician.
Make sure the tap is fully open. The
mains water supply may be cut off.
If the problem persists, the machine
will automatically stop after a while.
Unplug the machine, turn off the tap
and contact the nearest authorised
technician.
Clean the drain pump filter. If
the problem persists, contact the
nearest authorised technician.(*)
The machine will automatically
drain off the water. Once the water
has drained, turn off the machine
and unplug it. Turn off the tap and
contact the nearest authorised
technician.
EN
Advertenties
