Advertenties
Beschikbare talen
Beschikbare talen
C
• Unscrew the water inlet hose(s) at the washing machine.
• To remove the filter mounted on the water inlet valve, use needle nose pliers to gently
pull on the plastic bar inside the filter.
• A second filter is mounted on the end of the water inlet hose to be connected to the tap.
To remove the second filter, use needle nose pliers to gently pull on the plastic bar inside
the filter.
• Thoroughly clean the filter using a soft brush and wash with soapy water. Then rinse
thoroughly. Reinsert the filter, by pressing on it lightly.
CAUTION
Filters fitted to the water inlet valve can get
clogged as a result of poor water quality or lack of
maintenance. This may cause water leaks. Such
incidents are not covered by the warranty.
Drain pump filter
The washing machine's drain pump filter system prolongs the lifetime of the pump by
preventing lint from getting inside. We recommend cleaning the drain pump filter every 2
months. The drain pump filter is located behind the access hatch in the lower right corner
of the front of the machine. To clean the drain pump filter:
All manuals and user guides at all-guidesbox.com
Useful information
27
1
3
5
6
EN
2
4
Advertenties
