Advertenties
Beschikbare talen
Beschikbare talen
If there is any visible surface moisture or
o
water: Wipe the surface and allow it to
dry for a few minutes before starting the
measurement .
Before measuring: Remove colour
o
residues, dust etc . from the corresponding
surface .
The product is not suitable for measuring
o
metal or other highly conductive
materials . If metal (e .g . nails, screws,
cables, pipes, etc .) is enclosed in
the measuring range of the moisture
sensor
considerably .
Maintain a minimum distance of
o
8 to 10 cm from other objects to avoid
interference .
Place the moisture sensor
o
surfaces . Rough surfaces lead to
inaccurate measurement results .
The measuring depth of the product is
o
30 mm for softwood/hardwood and
10 mm for plaster/cement screed .
Depending on the density of the material,
it may not be possible to measure the
inner core . If the material has a thickness
of less than the above mentioned
measuring depth, the measured value of
the moisture level may be inaccurate due
to neighbouring material .
The density of the measured material
o
plays an important role in the
measurement result . The measured value
increases with the respective density .
28 GB/IE/NI
, the measured values increase
19 ]
[
on smooth
19 ]
[
Advertenties
