Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cleaning and Maintenance
Before Carrying out Maintenance Work:
Always turn off and unplug the unit.
1.
Make sure system is at room temperature.
2.
Using hard or mineral rich water will cause water stain to appear on the stainless steel
3.
following methods to remove stains and lime
paper towel. Store it in a dry and well-ventilated environment at a normal temperature; please do not place it
in high-humidity environments or store it at high
Disassembly and Installation:
Detaching the Stainless Steel Column: pull the fixed clip down along the
1.
clockwise.
Pull downwards until it comes off. Sometimes the impellers will jam the motion when the steel column is
2.
being pulled off. Shake the column slightly from side to side to detach the steel column. The pump cap can
be removed prior to detaching the steel column.
Installation of stainless steel column: align stainless steel column with threads, and rotate the column
3.
counterclockwise and fix it. Then put the fixed clip in
Cleaning the Circulator:
The heating coil, pump shaft and sensors can be cleaned with detergent and a soft
water afterwards.
Cleaning the Steel Column:
Both the steel column and pump cap can be cleaned in a dishwasher or with detergent.
Decalcification:
Calcium Lime Rust Remover - Beware that this product can be very strong and gloves are recommended to
1.
be worn when handling this product.
Sodium Bicarbonate.
2.
accumulation.
After
cleaning,
temperatures.
place.
-- 06 –
column.
Use the
please wipe it dry with a cloth or
column,
then rotate the column
toothbrush.
Rinse it with
Advertenties
Inhoudsopgave
