Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. S lide the hose handle into the telescopic tube (see figure 3A).
7. P ress the button on the telescopic tube and keep it pressed in;
you can then extend or retract the tube to the required length
(see figure 3B).
8. P ress the foot button on the nozzle to set the combi nozzle for
use on hard or soft surfaces, (see figure 3C). For use on hard
surfaces, press the foot button on the combi nozzle to extend
the brushes. Lift the button for use on soft surfaces.
Accessories
This vacuum cleaner is supplied with one combined accessory:
•
a crevice tool with a narrow nozzle, which you can use to clean
radiators, window frames, crevices, small openings, and similar;
•
a dusting brush, which you can use to clean delicate or
irregular surfaces, furniture, Venetian blinds, and similar.
operAtion - storage after use
1. Remove the plug from the wall socket.
2. P ress the rewind button and keep it pressed in;
the power cord will automatically rewind.
G uide the power cord whilst it rewinds, since
otherwise the cord could become tangled or the
plug could strike the back of the appliance. Take
hold of the power cord near the mark, and allow
it to gently slide through your fingers back into
the appliance, see Figure 5.
3. A t the back of the combi-nozzle you can find a
parking bracket. At the back and the bottom of
the vacuum cleaner you can find parking slots.
You can easily store the vacuum cleaner in a
vertical or horizontal way . Place the parking
bracket in one of the parking slots.
cleAninG And MAintenAnce
1. C lean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. O ver the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
•
Never immerse the appliance, plug or power cord in water.
•
N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - changing the dust bag
1. Change the dust bag immediately once the 'dust bag full' indicator turns red, see Figure 7.
I t is possible that the indicator turns red whilst the dust bag is not yet full. If so, then the nozzle, hose or
tubes may be blocked. These will then need to be cleaned.
user's instructions
A
24
B
C
Advertenties
Inhoudsopgave
