Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
position, the LED indicator light
• Then remove the power plug from the mains power.
Low heat mode
To warm up the room slowly, turn the power / mode knob
The device will warm up the room at low heat mode. With the adjustable thermostat knob
6
you can adjust the temperature setting. When the set temperature (thermostat) is
reached, the LED indicator light
temperature (thermostat) is lower than set, the device will heat again and the LED indicator
4
light
will illuminate.
High heat mode
To warm up the room quickly, turn the power / mode knob
The device will warm up the room at high heat mode. With the adjustable thermostat
6
knob
you can adjust the temperature setting. When the set temperature (thermostat) is
reached, the LED indicator light
temperature (thermostat) is lower than set, the device will heat again and the LED indicator
4
light
will illuminate.
Thermostat
With the adjustable thermostat knob
Increase the thermostat temperature setting by turning the adjustable thermostat knob
clockwise.
Decrease the thermostat temperature setting by turning the adjustable thermostat knob
counter clockwise.
When the set temperature (thermostat) is reached, the heating will stop and the LED
4
indicator light
will no longer illuminate.
Once temperature (thermostat) is lower than set, the device will start to heat again, and the
LED indicator light
Tip over switch
The device is equipped with a tip over switch (fall protection) that switches off the device
if the device should fall over unexpectedly or when the device is lifted. When the device is
lifted or has fallen over, the device will stop working.
• Before you lift or move the device, or if it has fallen over, turn the power / mode knob
to the "OFF" position, unplug the device from the mains power and allow the device to cool
down fully (± 30 minutes).
• Check the device for damage. In case of damage or abnormal functioning, stop using the
device.
4) CLEANING AND MAINTENANCE
• Clean the device regularly
• Switch the power / mode knob to the "OFF" position, remove the plug from the mains
power and allow the device to cool down fully (± 30 minutes).
• Never immerse the device in water or any other liquid.
• Clean the power cable and device with a damp cloth.
• Check the air inlet and air outlet of the device for dust and dirt. Remove dust and dirt
4
will no longer light up.
4
will no longer illuminate and the heating will stop. Once
4
will no longer illuminate and the heating will stop. Once
4
will illuminate.
6
you can adjust the temperature setting.
EN 07
5
to the low heat position "1".
5
to the high heat position "2".
6
6
5
Advertenties
Inhoudsopgave
