Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Parts & features device
Heater (Device)
1
Tempered glass panel (front)
2
Air inlet / outlet grid (back)
3
LED indicator light
4
Power / mode knob
5
Adjustable thermostat knob
6
7
Feet
First use
• Remove the device and accessories from the box. Remove any stickers, protective film or
plastic from the device.
• Before using the device for the first time, clean the base with a damp cloth.
• Thoroughly dry the device.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool;
these could damage the device.
• Mount the supplied feet
the device upside down on a towel or blanket to prevent damage. Use the supplied set of
screws and carefully mount the feet to the device, using a screwdriver.
• Place the device on a flat, stable surface, in a place where it cannot fall over.
• Make sure that the power/ mode knob
• Connect the device to the mains power.
Control panel
Power / mode knob
OFF = Power OFF
1 = Low heat mode
2 = High heat mode
Adjustable thermostat knob
MIN = decrease temperature
MAX = increase temperature
Modes
Power ON/OFF
• Make sure the power plug is connected to the mains power.
• Power on the device by turning the power / mode knob
LED indicator light
• To power off the device, turn the power / mode knob
1
2
7
in the corresponding holes on the bottom of the device. Place
5
6
4
will illuminate.
5
is in the "OFF" position.
5
6
5
5
counter clockwise to the "OFF"
EN 06
3
7
clockwise to position 1 or 2, the
4
5
6
Advertenties
Inhoudsopgave
