Advertenties
Beschikbare talen
Beschikbare talen
EN
EN
Manual
Manual
Setup voice assistent
Note: Please note that only 2,4 GHz networks are supported. 5GHz
networks will not work. Ask your provider how to turn on both frequencies.
1
Google Home & Amazon Alexa
To control your device by using your voice via a smart speaker, please
refer to the manufacturers instructions manual on how to enable a voice
command through your device.
Notes:
- If any problems, please restore the lamp to factory default and set it
up again from start!
- For Google assistant and Alexa; if these cannot be found, try to disable
the FLINQ function or the home skill app (for Alexa)
- If you need to fully RESET the Smart lamp follow the RESET instructions
in the FLINQ app or the FAQ.
- Do not open the Smart lamp yourself
- This Smart Lamp is not a TOY, Keep away from children!
- Only use this smart lamp with earthed power outlets and not with
extension cables (for charge)
- Do not use with appliances that could cause any fi re in unattended use
(like irons etc)
- This Smart lamp does not have any safety disconnection
- Any other use as the intended way for this Smart lamp is not validated
for any warranty or liability.
- This Smart lamp is only used for private use
Notes:
- When the product will not be used for a long time, please place the
product in a place with suffi cient sunlight, with a charging time for at
least 1 – 3 day's in OFF position. For keeping the function of the battery,
you'd better comprehensively charge the product in a place with
suffi cient sunlight for once a month.
- The charging time and charging effi ciency of the solar panel may be
aff ected by the weather and the installation position. Considering the
conversion rate of solar power generation, if the product is used with
good sunny weather conditions, it will gain higher charging effi ciency
and eff ectiveness by the solar panel and it's battery.
- When there's sunlight and other lights and if the power switch is OFF,
the LED lamp will not be lightened in day and night time.
- The solar lamp should be installed in the place with suffi cient sun light
to ensure the solar panel will absorb sunlight suffi ciently, so that the
working hours of the solar lamp will be prolonged.
- If snow or ice is on top of the solar panel please remove it at all time's so
the battery can be charged correctly by the panel.
- This solar light is only used for domestic private and non-commercial
use.
Security and important safety instructions
When using electrical products, certain precautions must be followed,
including the following:
- Choose a stable, solid and supportive surface and make sure the lights
are set correctly.
- This lamp is intended for outside use!
- This is not a TOY, keep away from small children below 12 years.
- Do not place or immerse the lamp under water like pools and ponds! It is
not FULL waterproof (IP68).
- Do not use with appliances that could cause any fi re in unattended use
(like irons etc.).
- Any other use as the intended way for this device is not validated for any
warranty or liability.
- Do not use the device excessively and do not store them under heavy
pressure. The device is not resistant to extreme heat.
- Do not open or disassemble the lamp yourself, this will void the warranty
at all times.
- Do not disassemble, repair or modify the product by yourself as this may
result into an electric shock.
FlinQ Smart Outdoor Orion
Advertenties
