Advertenties
Beschikbare talen
Beschikbare talen
Manuel
EN
Before fi rst use
• Place the device on a fl at, stable surface and ensure at least 10 cm of free space
around the device. This device is not suitable for installation in a cabinet or for
outdoor use.
• When the heater is switched on for the fi rst time, a slight, harmless odor may
develop. This smell is caused by the heating of the inner heating elements. Ensure
adequate ventilation.
• During heating and cooling, noises may occur due to the expansion and contraction
of the heating jacket. This is normal and does not indicate a defect.
Usage
Insert the plug into a suitable socket on an alternating current supply with the same
voltage as indicated on the rating plate. The touch screen buttons on the product
control panel display also correspond to the remote control functions of the app. The
buttons on the app control have the same function as on the heater control panel
display. Warning: It takes a while for the receiver to respond to the transmitter. Do not
press the buttons more than once within two seconds for proper operation.
Explanation of display buttons
1
1. Display
2. Temperature up
2
5
3. Temperature down
4. On/off & standby
3
6
5. Mode (1000 / 2000W) / reset
6. Timer
4
7
7. Child lock
Power function
Before using the heater, you must turn on the main switch on the side of the heater.
Press the power button (4) to set functions. The upper part of the display shows the
room temperature. The heater operates in low power heating conditions.
Mode
Press to change the wattage. Press once for 1000W, press again for 2000W. The
setting is shown by one vertical stripe (1000W) or 2 vertical stripes (2000W) at the top
left of the display.
Temperature selection
Press "+" or "-" button to select the desired temperature in a range of 5° - 40°C.
The temperature indicator remains lit for a long time. The internal temperature is
displayed every time the device is started. The temperature can be set when the
device is in standby or heating mode. When the room temperature reaches the set
level, the high temperature power stops and the low temperature power remains
active. If the room temperature is 2 degrees higher than the set temperature, both
the high and low temperature powers will no longer work. The machine will only
start working again when the temperature drops 2 degrees compared to the set
temperature.
Timer
Press the timer button "6" to select the desired range between 1 hour and 24 hours.
The remaining time is shown on the display. The timer button can be set to start or
stop the device at the desired time, with a time interval between 1 hour and 24 hours.
Child lock
Press and hold the child lock button for 3-5 seconds so that the lock icon appears on
the screen. Now you cannot use the device except for the power button. Use the same
method to disable the child lock function again. Once the child lock is activated, you
will not be able to operate any of the heater touch screen functions.
Remark:
The child lock can be canceled by unplugging the heater from the socket or by
switching it off with the on/off main switch on the side of the device.
FlinQ Smart Indoor Panel Heater
Advertenties
