MALFUNCTIONS
Problem with the hob
Error code E3/E4.
Error code E9.
Other error codes.
Problems with the oven
The oven light does not work.
The oven does not heat up.
A visit by a service technician during the warranty period will be charged if the appliance
is not functioning because of improper use!
Possible cause
Supply voltage or frequency is
different from the rated values.
Unsuitable cookware or
moving cookware too quickly.
Defective generator.
Possible cause
The oven light is defect.
No temperature set.
Electronic timer active.
Solution
Switch off the hob and let
it cool down (H disappears
from the displays). Switch on
the hob. If the same error is
displayed again, contact the
service department.
Try different cookware.
Alternative: disconnect the
cooker from the power for a
short period. Switch on the
hob again. If the same error
is displayed again, contact
the service department.
Contact the service
department.
Solution
Replace the oven light.
Set the temperature using the
temperature knob.
Set the electronic timer to
'0:00'.
EN 21