Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cladding
● The cladding may not be overheated, as cracks
could appear.
● Use a maximum of 3 kg wood for heating.
● As the natural cladding comes from a „grown" boul-
der, structure and colour scheme may be very dif-
ferent.
● The surface may be altered under temperature in-
fluence.
Cleaning
What?
inside of stove
connection piece
glass panel
painted surfaces
Water pipes
The water pipes in the upper combustion chamber
should be cleaned on a regular basis. The cleaning in-
terval will depend on the level of soiling.
● Remove the deflector plate from the combustion
chamber.
● Unscrew the insulating flap above the combustion
chamber opening (2 wing nut, Fig. 5).
● Unscrew the inspection hatch (6 nuts).
● The device should be cleaned using the wire brush
provided.
How often?
at least 1 x per year
at least 1 x per year
as required
as required
Special information
The manufacturer's guarantee expires if the stove is
significantly or permanently overloaded above the
nominal heating output, or if fuels other than those list-
ed are used.
● The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a fire-
proof, non-combustible container.
● Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
● Convection air openings may not be covered.
● Never use white spirit, benzene or other inflamma-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al-
tered. In particular, it must be ensured that any nec-
essary combustion air pies are open while the fire-
place is being used.
● Do not make any changes or modifications to the
stove.
Using what?
hand brush, vacuum cleaner
hand brush, vacuum cleaner
when cold
using glass cleaner for stoves- and oven glasses
when cold
with a slightly damp microfibre cloth
23
Advertenties
Hoofdstukken
Inhoudsopgave
