• Never jump, race, perform stunts or abuse your bicycle.
• Never ride under the influence of intoxicating drugs or alcohol.
• We strongly recommend using lights, when riding in the dark, fog or poor visibility.
• When cleaning this bike, please wipe the surface with a piece of soft cloth. For very dirty areas you can
wipe it with a little neutral soap and water.
Warning:
do not wash this electric bike direct with spraying water especially pressure washers.
Avoid water entering electric components as this may result in damage of the electric components.
3. Operation
Your new electric assistance bicycle is a revolutionary transport means, applying aluminum frame, Li-ion
battery, a super high efficiency electric hub motor and controller with electric pedal assistance system, to
support normal pedaling. The abovementioned equipment will ensure safe riding with excellent function
and performance. It is important for you to note the following guidelines to ensure getting the best
possible experience from your electric bicycle.
Checklist before Riding
3.1.1 Please ensure tyres are fully inflated as indicated on the tyre wall, before riding.
Remember, performance of the bike is directly related to the weight of the rider and baggage/load,
together with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up,- using a degreaser, then wipe clean and
oil bicycle chain again.
4. Battery installation & usage
The electric bikes have the battery positioned onto the frame down tube (the battery pack is directly
connected to the controller box which is under battery bottom.
4.1 Lift the battery above the frame down tube, aligned position of battery slides then put the battery
case inside the slot, ensure a snug fit, then lock it tightly. Fixing the battery well, use the key to lock the
battery with slide. (Fig 3.1~3.3)
7/69