Download Print deze pagina

Putting Into Service - Cintroclear UF 400 Montage- En Onderhoudshandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

We would like to thank you for purchasing the CINTROCLEAR UF 400 water purifier. This product

has been manufactured using solely optimised, quality components in order to ensure reliable, long-term

operation. We are convinced that it will fulfil your expectations and we would like to take this

opportunity of wishing you long and pleasant use of your CINTROCLEAR purifier.

When unwrapping your purifier do not put it down vertically, it is unstable in this position. Lie it down flat on

its rear face. Your purifier has been subjected to several air tests during its manufacture. To remove the plug

on the blue pipe connector, hold down the locking ring and pull the plug out, as for a pipe (see

"disconnection" paragraph in the booklet "using quick connectors" on page 6).

Read these instructions before operating your Cintroclear UF 400 purifier. The few minutes that this

takes will mean that installation is simplified.

Keep these instructions carefully and, as the case may be, hand them on to the next owner.

This unit is designed solely to purify public water. Any other unapproved usage may be dangerous. The

manufacturer declines any responsibility for damage caused to persons or goods in the event of this unit being

used incorrectly or in an unapproved manner.

INSTALLATION OF CINTROCLEAR UF 400 WATER PURIFIER

For optimal operation of your purifier, the minimum water inlet pressure must be 3,5 bars. For any lower

pressure, please consult your distributor to determine the most suitable solution in your situation. The

maximum permitted pressure is 5,5 bars. Above this value a pressure reducing valve must be installed to

prevent damage to and leakage from the unit.

1 special pure water tap with mounting base

2,40 m of water inlet pipe 3/8" red polyethylene

2 m of pure water outlet pipe 1/4" blue polyethylene

ACKNOWLEDGEMENT

Unwrapping