Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. ELECTRICAL CONNECTIONS
The supplied cablings don't provide any intermediate connection, but they directly connect each device to the control board.
4.1. MOTOR CONNECTION
CONTROL BOARD SIDE: insert the two cablings for motor and brake (code 9635), through the cable glands 4 and 3 (fig.11).
Insert the thermal protection cable through the cable gland 7. Fit the connectors on the control board as shown at par. 5.1.
11
MOTOR SIDE: open the junction box, disconnect and remove the cablings 4327 and 9029 (fig. 12). Drill a hole Ø9 on the
box (fig. 13) and insert the grommet, present on the cabling 9634. Insert the cablings 9634 and 9635 and connect to the
terminals as shown at par.5.1. Connect the cable with ring nut to the encoder (fig.14).
12
13
4327
9029
Ø9
5
6
7
1
2
3
14
- 31 -
Thermal protection (9634)
8
4
Motor (9635)
Brake (9635)
Disconnect
Black
0
Blue
140
Yellow/green
U
Black
M
V
3 ~
Brown
W
Grey
White
Rod
0DT872 01-12-2021
EN
Advertenties
Hoofdstukken
Inhoudsopgave
