Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Connect the USB Type A plug
computer or to a USB power adaptor (not included).
2. Connect the charging adaptor
on the back of the product. The charging adaptor is held in place
magnetically.
3. The start of the charging process is shown on the display
4. When the battery is fully charged: Disconnect the charging
[
adaptor
the USB port.
NOTES:
The charging adaptor
in figure B.
Make sure that the charging pins
charging contacts
The product turns on automatically as soon as it is connected with
the USB port.
The product cannot be operated during charging.
The charging status is shown on the display
A charging cycle (charging current: approx. 160 mA) takes
approx. 2 hours.
˜ Changing the wristband
1. Push the spring pin
2. Remove the wristbands and store them safely.
3. Insert a compatible new wristband and fix both spring pins until
they lock securely.
NOTES:
Compatible wristbands may contain different spring pin variants.
Read the instruction manual of your optionally available
wristband carefully to ensure a tight and secure fit. Otherwise, the
wristband could come loose and damage the smartwatch.
Also note that the width of the wristband is compatible with the
smartwatch. The recommended width is 20 mm.
]
from the product and the USB Type A plug
[
]
can only be used in the position shown
5 ]
[
.
[
]
of each wristband inwards.
8 ]
[
to a free USB port on your
[
]
to the charging contacts
9 ]
[
correctly engage with the
2 ]
[
5 ]
[
2 ]
[
.
8 ]
[
from
.
GB/IE/NI
15
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
