Download Inhoudsopgave Inhoud Print deze pagina

Items Supplied; Operation; Switching On/Off And Controlling Air Flow - SilverCrest SWBP 1000 A2 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

ing the air inlet before switching the de-
vice back on.
Never switch on the device at the same
time as there is another device with a
high power consumption attached to the
same multi-socket power strip.
Do not use an extension cable.
DANGER! Risk of injury
through burning
Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
Do not touch the hot surfaces of the de-
vice.
Allow the device to cool down com-
pletely before you clean it or put it
away.
Allow all accessories to cool down be-
fore removing them from the device.
WARNING! Risk of material damage
Only use original accessories.
Never place the device on hot surfaces
(e.g. hot plates) or near heat sources or
open fire.
Do not clean using sharp objects or
abrasive cleaning agents.
Do not expose the device to tempera-
tures below -10 °C or above +40 °C.

4. Items supplied

1 Hot Air Brush
2 Styling brushes:
1 round brush 9
1 Semi-round brush 12
1 copy of the user instructions
6
GB

5. Operation

NOTE: before using it for the first time,
switch the device on for a few minutes and
allow it to run at the highest speed and high-
est temperature setting. As a result of the
manufacturing process, you may notice a
slight odour. This is normal and only occurs
during first use. Ensure that the room is well
ventilated.
Ionisation function
This device has an ionisation function that
permanently applies ions to the hair to re-
duce the static charge of the hair and im-
prove hair styleability.
5.1 Switching on/off and
controlling air flow
1. Connect the mains plug 1 with an easi-
ly accessible wall socket. The wall sock-
et must still be easily accessible after
connection.
2. Using the on/off switch 5 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
0 = off
I = slow air flow, lower temperature
II = fast air flow, higher temperature
3. After drying/styling, switch the on/off
switch 5 to 0 (off) and pull out the
mains plug.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave