Installation; Installer / User Mode - Duco IQ-unit Snelle Start
Verberg thumbnails
Zie ook voor IQ-unit:
- Gebruikershandleiding (2 pagina's) ,
- Gebruikershandleiding (2 pagina's) ,
- Gebruikershandleiding (2 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
6
Installation
6A.
Installer / User mode
To add, remove or replace components in the network, the system
must be set to 'Installer mode'. The LED on each component indicates
the active mode of the component (see table below).
'Installer mode' can be activated by pressing the IQ-unit 'INST' button.
Once the LED on the master unit starts flashing, it means that 'Installer
mode' is active. Press 'INST' again to return to 'User mode' (LED fully
on or off). The system reverts automatically to 'User mode' after 15
minutes of inactivity.
92
Advertenties
Hoofdstukken
Inhoudsopgave
