Fronius Primo 3.5-1 Gebruiksaanwijzing pagina 29
Verberg thumbnails
Zie ook voor Primo 3.5-1:
- Bedieningshandleiding (176 pagina's) ,
- Gebruiksaanwijzing (172 pagina's) ,
- Installatiehandleiding (48 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTE! To successfully update the inverter software, the USB stick provided for
the purpose must not have a hidden partition or any encryption (see chapter "Suit-
able USB sticks").
Save the update file to the highest data level of the USB stick
2
Open the data communication area
3
Plug the USB stick containing the update file into the USB socket in the data commu-
4
nication area
Select 'USB' from the Setup menu, followed by 'Update software'
5
Press the 'Enter' key
6
Wait until the version currently installed on the inverter and the new software version
7
are displayed for comparison:
-
1st page: Recerbo software (LCD), key controller software (KEY), country setup
version (Set)
-
2nd page: Power stage set software
Press the 'Enter' key after each page
8
The inverter starts copying the data.
'UPDATE' and the progress of storing the individual tests expressed in % are displayed un-
til all the data for all the electronic modules has been copied.
Once copying is complete, the inverter updates the electronic modules as required in se-
quence.
'UPDATE', the affected modules and the update progress in % are displayed.
The final step is for the inverter to update the display.
The display remains dark for approx. 1 minute while the monitoring and status LEDs flash.
Once the software update is complete, the inverter enters its startup phase before going
on to start feeding energy into the grid. The USB stick can be unplugged.
When the inverter software is updated, any custom settings that were configured in the
Setup menu are retained.
Logging interval
Activate / deactivate the logging function and specify a logging interval
Unit
Setting range
Factory setting
30 min.
20 min.
15 min.
10 min.
5 min.
No log
IMPORTANT! In order for the logging function to work correctly the time must be set cor-
rectly.
Minutes
30 min. / 20 min./ 15 min./ 10 min./ 5 min./ No log
30 min.
The logging interval is 30 minutes; every 30 minutes new log-
ging data will be saved on the USB stick.
The logging interval is 5 minutes; every 5 minutes new logging
data will be saved on the USB stick.
No data is saved
29
Advertenties
Hoofdstukken
Inhoudsopgave
