Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
5) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:
1 CHANNEL MODE: for extremely easy setup and use! (display shows "1Ch")
11 CHANNEL MODE: for full control of all possibilities. (display shows "11C")
Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
Press the FUNC-button until the display shows: "1Ch" or "11C".
Press the UP/DOWN buttons to select the desired DMX-mode. (1Ch or 11C)
Press the ENTER-button to confirm your choice.
Press the FUNC-button until the display shows a 3 digit number
Select the desired DMX-address (from 001 to 505)
Press the ENTER-button to confirm your choice.
Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
"daisy chain" your DMX controller and all the connected light effects with a good quality XLR M/F balanced
cable. To prevent strange behavior of the light effects, due to interferences, you must
use a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables,
this simply won't work!
Each effect in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
1 CHANNEL DMX-CONFIGURATION OF THE LASER:
CHANNEL
VALUE
000-019
Laser OFF (Black out)
SLD mode (Slow Moving Dots Effect)
020-039
FAD mode (Fast Moving Dots Effect)
040-059
SOD mode (Sound activated Moving Dots Effect)
060-079
080-099
SLL mode (Slow Moving Lines Effect)
CH 1
FAL mode (Fast Moving Lines Effect)
100-119
MODES
SOL mode (Sound activated Moving lines Effect)
120-139
SLP mode (Slow Moving Patterns Effect)
140-159
FAP mode (Fast Moving Patterns Effect)
160-179
180-199
SOP mode (Sound activated Moving patterns Effect)
200-219
SRA mode (Sound activated Random Effect)
ARA mode (Auto Running Random Effect)
220-255
11 CHANNEL DMX-CONFIGURATION OF THE LASER:
IMPORTANT REMARK: DMX Channel1 is used to set the different working modes of the laser.
To use the laser in full 11 channel mode, channel 1 must be set to value 251 or higher.
JB SYSTEMS
®
USER MANUAL
DESCRIPTION
7/58
LASER BURST III
ENGLISH
CHANNEL
VALUE
000-019
Laser OFF (Black out)
ARA mode (Auto Running Random Effect)
020-039
040-059
SRA mode (Sound activated Random Effect)
060-079
SLP mode (Slow Moving Patterns Effect)
FAP mode (Fast Moving Patterns Effect)
080-099
SOP mode (Sound activated Moving patterns Effect)
100-119
CH 1
SLL mode (Slow Moving Lines Effect)
120-139
MODES
FAL mode (Fast Moving Lines Effect)
140-159
160-179
SOL mode (Sound activated Moving lines Effect)
SLD mode (Slow Moving Dots Effect)
180-199
FAD mode (Fast Moving Dots Effect)
200-219
SOD mode (Sound activated Moving Dots Effect)
220-239
240-255
DMX MODE (other channels activated
CH 2
000-255
Motor1 Rotation Speed
M1 ROT. SPEED
CH 3
000-075
Motor1 clockwise rotation
M1 ROTATION
076-150
Motor1 stop
DIRECTION
151-255
Motor1 anti-clockwise rotation
CH 4
000-255
Motor1 Shaking range
M1 SHAKE RANGE
000-056
Motor1 Shaking mode 1
CH 5
057-112
Motor1 Shaking mode 2
M1 SHAKE MODE
113-168
Motor1 Shaking mode 3
169-255
Motor1 Shaking mode 4
CH 6
000-255
Motor2 Rotation Speed
M2 ROT. SPEED
CH 7
000-075
Motor2 clockwise rotation
M2 ROTATION
076-150
Motor2 stop
DIRECTION
151-255
Motor2 anti-clockwise rotation
CH 8
000-255
Motor2 Shaking range
M2 SHAKE RANGE
000-056
Motor2 Shaking mode 1
CH 9
057-112
Motor2 Shaking mode 2
M2 SHAKE MODE
113-168
Motor2 Shaking mode 3
169-255
Motor2 Shaking mode 4
000-028
RED + GREEN
GREEN
029-056
RED
057-084
RED off, strobed GREEN
085-112
CH 10
113-140
GREEN off, strobed RED
COLORS
141-168
RED on, strobed GREEN
GREEN on, strobed RED
169-197
Both RED and GREEN strobed
198-224
225-255
RED and GREEN alternately strobed
CH 11
000-255
Slow to Fast
STROBE
JB SYSTEMS
®
USER MANUAL
DESCRIPTION
8/58
LASER BURST III
Advertenties
Inhoudsopgave
