Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.0 USER INSTRUCTIONS
3.1 POSITIONING THE REMOTE CONTROL RECEIVER.
Place the remote control receiver in the bottom left
corner of the unit before you mount the decorative
frame (check FIG. 6).
Slide the cable between the outer casing and the
bottom of the combustion chamber. (check FIG. 6).
REMOTE CONTROL
3.2
TECHNICAL SPECIFICATIONS
Ultrasound Transmission:
Ambient Temperature:
Batteries required:
Handset: 1 x 9V block (alkaline recommended)
Receiver: 4 x 1,5V AA (alkaline recommended)
CONNECTIONS
The G30-ZRPTT is intended for use only with motorized gas
combination controls models GV34
(or GV36 retrofitted with a motor). The receiver cable must be
firmly plugged onto the flat blade
connectors.
motor:
micro switch:
Range:
Frequency:
Transmitter & Receiver:
Connecting Cables:
6,3 and 4,8mm;
both 2,8mm
1...10m
3...33ft.
ON 40,5kHz,
OFF 40kHz
max. 60°C 140°F
max. 180°C 356°F
FIG. 6
26
Advertenties
Hoofdstukken
Inhoudsopgave
