Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Monitors with a curved back
• Before attaching the VESA adapter, ensure that there are suitable mounting holes on the back of your monitor.
• The existing monitor stand normally has to be removed before you can attach the monitor to a ceiling mount. For
details, refer to your TV/monitor operating instructions. Remove the monitor's stand; depending on the design, this
will either be screwed or clipped in.
• Always ensure that you use the correct screws when securing the VESA adapter to the back of your monitor. The
thread on the screws must match the screw holes on the monitor and must not be too long, otherwise the monitor
may be damaged.
• The screws must not be too short, however, otherwise the stand will not be securely attached to the monitor. The
screws must be screwed into the threaded fixture holes on the monitor with at least 5 full 360° turns.
• The screws for the ceiling mount/monitor are usually included, but you may need to purchase other screws
depending on the design of your monitor. Do not use any force when tightening the screws, otherwise you may
damage the monitor and void the warranty!
• If you are in any doubt about the length of the screws required, contact the monitor manufacturer or consult a
specialist.
30
Advertenties
Hoofdstukken
Inhoudsopgave
