Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
b) Securing the motorised ceiling mount
Start by securing the ceiling mount (A) to your concrete, brick, or other ceiling using the screws and dowels provided
(see parts list). The mounting instructions are the same for sloping ceilings.
• Use the drill template provided to mark the positions of the drill holes. Drill the holes to the correct diameter and
depth (refer to the specifications in the diagram above).
• Insert the two screws that you are going to fix to the key-shaped holes on the ceiling mount, allowing them to
protrude about 5 mm from the ceiling.
• If you are securing the TV mount to a non-mineral surface or ceiling (e.g. wood), follow the steps above, but use the
screws without dowels and make the holes slightly smaller (4.5 mm wide and 55 mm deep).
• If you are securing the TV mount to a surface in a lightweight construction, refer to the specific instructions for the
mounting components that you are using.
• Slide the TV mount into the screws on the ceiling/surface and insert the remainder of the screws as shown above.
• Align the TV mount in a straight position and secure all of the screws with a Phillips screwdriver.
28
W-C
W-A
Advertenties
Hoofdstukken
Inhoudsopgave
