Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Operating elements
8. Preparation for mounting
The TV ceiling mount must be secured to a strong ceiling. Ensure that the surface of the ceiling is appropriate for the
TV mount. Do not mount the product if the texture of the ceiling is not suitable. Thin partition walls or plasterboard
(including plasterboard sloping ceilings) are normally not suitable. However, special dowels are sometimes available
for these types of surfaces. If in doubt, contact a specialist before mounting the product. Mounting materials may vary
depending on the mounting surface (e.g. for wood, only use screws and no dowels). In order to ensure that the mount
is fixed securely, always determine the load-bearing capacity of your ceiling. The ceiling must be able to support
10 times the maximum weight of the ceiling mount and the attached TV/monitor.
• Plan the mounting location carefully so that the ceiling mount and your TV/monitor will be at the desired height/
position.
• If necessary, use a spirit level.
Ensure that no cables or wires are damaged during drilling/screwing. Accidentally drilling into electrical
cables can cause a fatal electric shock!
• When working with electrical tools (such as a drill), pay attention to your safety and wear safety goggles. Long hair
must not get into turning parts. Do not wear rings or other jewellery.
• Ensure that nobody is underneath the ceiling mount when you are fixing it to the ceiling.
26
1
2
1 Low-voltage socket
2 LED
Advertenties
Hoofdstukken
Inhoudsopgave
