Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
USING THE "TRACK MEMORY":
STORING A MASTER CUE POINT:
There are 2 ways to set a master cue point:
Press the LOOP IN (4) button during normal playback to set the new cue point ("CUE on the fly").
Put the player in pause and use the jog/shuttle wheel to search for the exact location for the cue point.
Once this location is found, press LOOP IN button (4) to set the new cue point. (or press PLAY/PAUSE
button)
Once the cue point is programmed, just press the CUE button (7) to recall it.
STORING A SIMPLE CUE POINT TO THE "HOT CUE" BUTTONS:
First press the MEMORY button(10) to make the unit enter hot cue memory mode (MEMORY button is lit).
Press one of the four HOT CUE buttons at the right moment during normal playback: the HOT CUE
button you just pressed turns to blue colour to indicate that the desired cue point is stored. ("Cue on
the fly").
Put the player in pause and use the jog/shuttle wheel to search for the exact location for the cue point.
Once this location is found, press one of the four HOT CUE buttons to set the new cue point: the HOT
CUE button you just pressed turns to blue colour to indicate that the desired cue point is stored.
Once the cue point is programmed, just press the HOT CUE button to start playback from the stored cue
point.
STORING A LOOP TO THE "HOT CUE" BUTTONS:
This is very similar to storing a simple cue point. The only difference is that you have to put the TMC200 in
loop mode first. When the loop is playing, you press the MEMORY button to make the CD-player enter hot
cue memory mode (MEMORY button is lit). After this press one of the four HOT CUE buttons: the HOT
CUE button you just pressed turns to white colour to indicate that the loop, playing at that moment, is
stored. You can store up to 4 loops!
DELETE THE "HOT CUE" BUTTONS:
You can easily delete the contents of a HOT CUE button by pressing the DELETE CUE button (11),
followed by the HOT CUE button you want to delete. Or simply store a new cue point or loop to this HOT
CUE button. You can also erase all four HOT CUE buttons together by pushing the DELETE CUE button
(11) for more than 2 seconds. You will notice that all 4 HOT CUE buttons turn dark to indicate that the
HOT CUE buttons are empty.
USING THE "PERMANENT MEMORY":
For security reasons the cue points and loops stored in the HOT CUE buttons are not automatically stored
to the permanent memory. This means that if you recall a set of cue points and loops from permanent
memory to the HOT CUE buttons (which is track memory), you can change, edit and delete them as much
as you want. The permanent memory will not be affected until you make a backup of the HOT CUE
buttons to permanent memory.
STORING TO "PERMANENT MEMORY":
Press the MEMORY button (10) for 2seconds. The display shows "Saving" to indicate that the cue points
and loops in the HOT CUE buttons for that track are stored to permanent memory.
DELETE A TRACK IN "PERMANENT MEMORY":
Select the track that you want to delete and load the hot cues. Press the "DELETE CUE" and "MEMORY"
buttons together until the display asks "DEL ALL?". If you press the YES button (PITCH BEND+ button),
the track information will be deleted in the permanent memory.
RECALLING "HOT CUE POINTS/LOOPS" FROM PERMANENT MEMORY:
Because it takes some seconds to load the permanent cue points, they are not automatically restored.
Sometimes you simply don't need them so why would you wait for them? Below we explain how
everything works:
No cue points stored: When you select a track that has no cue points or loops stored in permanent
memory, nothing happens: you can start playback right away.
Cue points stored: When you select a track where cue points or loops are stored in permanent
memory, the TMC200 shows "Load Cues?" and wants to know if you want to load the cue points. This
is what you can do:
JB SYSTEMS®
11/77
USER MANUAL
ENGLISH
DELETE THE ENTIRE PERMANENT CUE MEMORY:
FIRMWARE UPDATES
Checking the actual firmware version(s)
Upgrading instructions
SPECIFICATIONS
Power Supply:
Power Consumption:
Output level:
Frequency response:
THD + noise (20kHz LPF):
S/N Ratio (IHF-A):
Short access time (next track):
Long access time (track 1 20):
Laser Pickup:
Electronic tracking:
DISC FORMAT:
MP3 FORMATS:
Dimensions:
Weight:
TMC200
JB SYSTEMS®
You press the YES button: Press yes (pitch bend + button) to load the pre-stored cue points
and loops. The display shows RECALL while the Hot cue buttons are filled up.
You press the NO button: the cue points are not loaded and the display becomes normal.
You can start playback right away.
You do nothing: after some seconds the display becomes automatically normal and of
course the cue points are not loaded.
Keep both the DELETE CUE-button (11) and MEMORY-button (10) pressed while switching the TMC200
on: the permanent cue memory is cleared. During this action the display shows "clearALL".
CAUTION: THIS ACTION IS IRREVERSIBLE; ALL CUE POINTS/LOOPS WILL BE DELETED!!!
To increase flexibility TMC200 can be upgraded at any moment, to add new functions or repair bugs if
they would exist. We suggest you check our website (www.jbsystems.be) from time to time to see if any
firmware update is available for download.
Keep the SGL/CTN-button (24) pressed while you turn the player on: the currently installed firmware
versions are shown on the display. The firmware contains different parts: Control + DSP + Servo, each
with their own version number.
Since upgrading instructions may change, please check the file "TMC200 – upgrade instructions.txt"
included with each update.
AC 100-240V, 50/60Hz
13W
2,0V +/0.5dB @ 1kHz, 0dB
17-20.000Hz (+/-0,4dB)
0,006% @ 1kHz, 0dB
>130dB @ 1kHz, 0dB
<2sec
<4sec
Sanyo 3spot detection 780nm
Full automatic digital tracking.
Possible file extensions:
.mp3 ~ .MP3 ~ .mP3 ~ .Mp3
ID3 tag compatibility:
ID3v2 and earlier
ISO9660:
Level1 (max. 8"/8.3" character style)
Level2 (max. 31/30 character style)
Joliet:
max. 63/63 character style
CD-ROM sector format:
mode-1 only
Max. Folders:
255
Max. Files:
999 (max. 255 per folder)
MPEG1 Layer3 (ISO/IEC11172-3):
mono / stereo sampled at: 32 - 44,1 - 48kHz
Bitrates:
32 – 320 Kbps
Bitrate modes:
CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2 Layer3 (ISO/IEC13818-3):
mono / stereo sampled at: 16 – 22,05 - 24kHz
Bitrates:
32 – 160 Kbps
Bitrate modes:
CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2,5 Layer3:
mono / stereo sampled at: 8 – 11,025 - 12kHz
Bitrates:
32 – 160 Kbps
Bitrate modes:
CBR (Constant Bitrate) or VBR (Variable Bitrate)
246(W) x 103,5(H) x 348(D) mm
2,66 kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
12/77
USER MANUAL
TMC200
Advertenties
Inhoudsopgave
