Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. If you select „Go to add", the available
devices are displayed in a list.
6. Select the smart battery (that you are using
for the device) by setting the check mark
. Select only one device at a time. If
there are other check marks for other de-
vices, clear the check marks by pressing
them.
7. Now press the
colour as the set check mark.
8. Confirm the successful connection with
„Finish".
The device is now listed on the tab
"At home" and can be selected.
If you have already connected other de-
vices to the app:
"At home", select the
4. On the tab
in the upper right. The app scans the
area for available devices and indicates
if available devices have been found.
If this is not the case, read on if
possible
5. Proceed as with
If a list of available devices is not auto-
matically suggested to you:
If the smart battery (that you are using for the
device) is not suggested automatically, fol-
low these steps:
"At home", select the
4. On the tab
in the upper right.
5. Select "Other" in the bar on the left.
6. Select „Other-2".
7. Confirm that the display is flashing ra-
pidly.
The app now searches for available devi-
ces and suggests them to you.
8. Select the desired device by pressing
the
to add it to the app.
9. First confirm with „Next", then with „Fi-
nish".
, that has the same
.
from point 5.
If you have already connected the
smart battery to the app:
4. Select the tab
5. Select the smart battery (that you are
using for the device). The
indicates that the smart battery is con-
nected to a Performance device.
Features of the app
Select the smart battery
using for the device). This takes you to the
overview page for the device with the
following information and settings:
- The tool device ID helps you identify the
exact tool
- The tool model is indicated along with
the production batch in brackets
- The current power consumption in
amperes
- The current speed is shown in RPM
(revolutions per minute)/min
- The current level is shown and can be
changed, instead of pressing the gear
selection switch (5)
- With the kickback control switch, you
can turn the kickback control on and off
- The device's operating mode can be
selected: Power, Professional and ECO
- With the lamp switch, you can turn the
work light on and off
- With LED brightness, you can control the
brightness of the work light by moving
the bar from 1% to 100%
- With the LED shutoff delay, you can set
how long the work light stays on after
the On/Off switch is released
- You can find the device's use time
- You can find how often the device has
overheated
- You can find how often the device has
been blocked
- You can find the tool overcurrent times
IE
"At home".
symbol
(that you are
-1
15
Advertenties
Hoofdstukken
Inhoudsopgave
