Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
IE
type of battery is used with other bat-
teries.
b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes, seek
medical assistance. Leaking battery
fluid may cause skin irritations or burns.
e) Do not use damaged or altered
batteries. Damaged or altered bat-
teries can be unpredictable and lead
to fire, explosion or risk of injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered
tool outside the temperature
range stated in the operating
instructions. Incorrect charging or
charging outside the permitted tem-
perature range may destroy the battery
and increase the risk of fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
10
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Safety information for drills
1) Safety instructions for all work
a) Use the additional handle(s).
Loss of control can result in injuries.
b) Ensure the power tool is well
supported before use. This power
tool generates high torque. Not sup-
porting the power tool securely during
operation may lead to loss of control
and injury.
c) Hold the power tool by the in-
sulated handle surfaces when
performing work where the
insert tool or screws may come
into contact with hidden wiring.
Contact with a live wire can also cause
a charge in metal parts of the tool and
result in an electric shock.
2) Safety information for using
long drills
a) Do not work at a speed higher
than the maximum permissible
speed for the drill. Higher speeds
can cause the drill to bend slightly
when rotating freely without contact
with the workpiece and can also cause
injury.
b) Always begin drilling at a low
speed and when the drill is in
contact with the workpiece. Hig-
her speeds can cause the drill to bend
slightly when rotating freely without
Advertenties
Hoofdstukken
Inhoudsopgave
