Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
L
If you want to add more sugar, please note the following:Switch off the device
and wait until the sugar container has come to a standstill before you add any
more sugar. This is important for ensuring that no sugar gets onto the heat
pipes (8). Sugar residues on the heat pipes may cause the device to overheat.
Cleaning and Storage
Please note!
■
Allow the device to cool down completely before cleaning it.
■
Do not spray cleaning agents directly onto the device.
■
The locking ring, the bowl and the measuring spoon are dishwasher-safe.
■
Do not use corrosive or abrasive cleaning agents, rough sponges or knives to
clean the device. These could damage the surfaces.
1. Make sure that the device has completely cooled down, is switched off and has
been disconnected from the mains power!
2. Dismantle the device (see the "Assembly" section).
3. Clean the base with a soft cloth and a little detergent.
4. Clean the detachable plastic parts, the measuring spoon and the sugar
container (3) with a little detergent and warm water.
L
The wooden skewers which are supplied are only suitable for one-time use.
5. Dry the device and the accessories thoroughly before you store them all away.
6. Store the device in a dry place that is protected from sunlight and is not accessible
to children and animals.
Troubleshooting
If the device does not work properly, first check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
our customer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device does not
work.
The fuse in the fuse
box is triggered.
07329_06532_DE-EN-FR-NL_A5_V5.indb 18
07329_06532_DE-EN-FR-NL_A5_V5.indb 18
18
Possible cause
The mains plug is not inserted
correctly.
The plug socket is defective.
There is no mains voltage.
Too many devices connected
to the same circuit.
Fix
Plug in the mains plug.
Try another plug socket.
Check the fuse of the mains
connection.
Reduce the number of
devices in the circuit.
25.07.2022 16:59:18
25.07.2022 16:59:18
Advertenties
Hoofdstukken
Inhoudsopgave
