Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.
Remove the protective cap and attach the gas supply hose to the device (left screw
threads!). Firmly screw on the nut with suitable
tools for unproblematic gas supply. (Diagram 1)
6.
Connect the pressure regulator to the gas
bottle. Firmly screw the nut on so that no gas
leakage can occur. Make sure when you install
the gas bottle that the gas hose is not bent or
kinked. Avoid turned and pulled tension.
7.
Check that the device is correctly attached to
the gas bottle and perform a complete gas
leakage test (see the description below in this
booklet).
8.
When you're sure everything is in order, open
the gas tap. (Diagram 2).
9.
Now insert the plug into the socket. Then set
the power switch to I (on) (Diagram 3). The
ventilator will start running.
10. Wait until the ventilator is running steadily and
stable. Now press the right-hand button of the
gas valve and keep it pressed down for 10
seconds. Then with your left hand simultaneously press the ignition button a few
times to ignite the device (Diagram 4).
11. After the gas starts burning, keep the gas valve
pressed in for another 15 seconds. After that,
you can let go and the gas will burn
continuously (Diagram 5).
12. To switch off the device, close the gas tap of
the gas bottle and wait until the flame goes out.
Now switch the power switch to O (off) and
remove the plug from the socket. Finally,
disconnect the pressure regulator from the gas
bottle.
Attention! The device will remain hot for a
while after use. Always remove the plug from
the socket when the unit is not in use.
13. If you have to change the gas bottle or want to use the device after a period of
storage, you must repeat the entire process, including the gas leakage test.
Attention: If you have tried to start the device according to the procedure described
above and that does not work after three attempts to ignite it, don't try it again. Due to
the high gas concentration, there is now an explosion hazard! Contact your dealer to
find out the reason for the malfunction.
21
Advertenties
Inhoudsopgave
