Download Inhoudsopgave Inhoud Print deze pagina

Werking In Manuele Modus Via Net - Mains Manual Mode Operation; Werkingsprocedure Via Net - Mains Procedure; Procedure Voor Uitschakeling Via Net - Mains Shutdown Procedure - Generac CUBE+ Instructiehandleiding

Inhoudsopgave

Advertenties

+
CUBE
8,4m 4x320W LED
14.10.4 WERKING IN MANUELE MODUS VIA NET – MAINS MANUAL MODE OPERATION
14.10.4.1 WERKINGSPROCEDURE VIA NET – MAINS PROCEDURE
Zet de keuzeschakelaar (19) op de stand
"NET" (
).
Zet de thermomagnetische schakelaars en de
differentiaalschakelaar
schakelbord on de stand "ON" (I).
Druk op de knop (45) in manuele modus
De machine is standaard in manuele werkwijze
ingesteld.
Om de mast met behulp de knop (20)
omhoog/omlaag te brengen.
Druk op de knoppen On/Off (46)
On om de lampen in te schakelen.
De lampen worden niet allemaal tegelijk aan
gezet, maar met een zekere wachttijd tussen
de ene en de volgende.
De status-LED's (47) knipperen tijdens de
wachttijd en blijven vast aan wanneer deze tijd
is verstreken en de lamp aan is.
14.10.4.2 PROCEDURE VOOR UITSCHAKELING VIA NET – MAINS SHUTDOWN
PROCEDURE
Druk opnieuw op de knoppen Lamp On/Off
...
(46)
om de lampen uit te schakelen.
De lampen worden niet tegelijk uit gezet, maar
met een zekere wachttijd tussen de ene en de
volgende.
De
status-LED
(47)
wachttijd en gaat uit wanneer deze tijd is
verstreken en de lamp uit is.
YANMAR ENGINE
op
het
frontale
.
...
in
knippert
tijdens
de
Turn the select (19) to "MAINS" (
Switch ON (I) the RCD and all circuit
breakers on the control panel.
Press the button (45) in Manual Mode
. The default Operation mode setting is
the Manual mode.
Use the Mast control button (20) to rise/lower
the mast.
Press Lamp On/Off (46)
switch On the lamps.
The
lamps
shall
simultaneously, but with a delay between one
and the other.
The Status Leds (47) blink during the delay
time, they stops to blink when the delay is
expired and the lamps are switched on.
To switch off the lamps it is needed to press
the lamp On/Off buttons (46)
The
lamps
shall
simultaneously, but with a delay between one
and the other.
The Status Leds (47) blinks during the delay,
they turn off when the delay is expired and
the lamps turn off effectively.
49
)
.
...
buttons to
not
switched
on
....
.
not
switched
off
TL203-01-13-00
20-08-2018
Nederlands - English

Advertenties

Inhoudsopgave
loading

Inhoudsopgave