+
CUBE
8,4m 4x320W LED
VOEDING VIA STROOMNET – MAINS SUPPLY
14.9.1
De groep kan via een enkelfasige lijn
230÷240 V 50 Hz worden gevoed. Zorg ervoor
dat deze lijn voorzien is van een geschikte
thermomagnetische differentiaalbeveiliging.
Sluit de mannelijke stekker 230÷240 V 16 A
2p+a IP67 EEC (27) aan op een stopcontact
met identieke kenmerken.
Opgelet!
Respecteer de aansluiting zoals aangegeven
in de afbeelding.
De minimumdoorsnede van de aansluitkabels
moet worden gekozen op basis van de
spanning, het geïnstalleerde vermogen en de
afstand tussen bron en gebruik.
MAINS HANDMATIGE MODUS: (raadpleeg
hoofdstuk
14.10.4)
thermomagnetische
differentiaalschakelaars gedeblokkeerd zijn.
MAINS AUTOMATISCHE MODUS: (raadpleeg
hoofdstuk 14.10.5) voor generator starten,
controleer
of
de
schakelaars en de differentiaalschakelaars
gedeblokkeerd zijn.
YANMAR ENGINE
EEC version
controleer
of
de
schakelaars
en
de
thermomagnetische
Utility mains 230÷240 V 50 Hz single phase
can be used as power supply for the unit.
Ensure the incoming line is provided of
adequate RCD and MCB protection.
Connect to the male plug 230÷240 V 16 A
2p+E IP67 EEC (27) the incoming line cable
by means of a socket with the same
characteristics.
Warning!
The connection should be as shown in figure.
Cross section and insulation characteristics
of
connection
cables
accordingly to the ampere and voltage input
ratings, taking into account the distance
between the source and the unit.
MAINS MANUAL MODE (refer the chapter
14.10.4), check that all circuit breakers and
RCD are switched on.
MAINS
AUTOMATIC
chapter 14.10.5), check that
breakers and RCD are switched on.
45
shall
be
choose
MODE
(refer
the
all circuit
TL203-01-13-00
20-08-2018
Nederlands - English