Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LED indicators
1 green LED.
2 green LEDs.
3 green LEDs.
3 green LEDs and 1 yellow LED.
3 green LEDs, 1 yellow LED, 1 red
LED.
All LEDs are on or flashes.
Iron button
The iron button function decreases the operation speed
to make it easier to cut in hard materials, for example
reinforcement bars.
The decreased speed can also be used to make it
easier for the drill bit to go into the surface of other
materials. For best performance, disengage the iron
button function when the drill bit is through the surface
and drill the hole at regular speed.
1
If the product stops because of overheating, the LEDs continue to flash until the product is cool and can be
started again.
10
Cause
The product is connected to the pow-
er pack and can be operated.
Power output is less than 70% of
available output during operation.
Power output is between 70% and
90% of available output during opera-
tion.
Power output is more than 90% of
available output.
Max. power output.
There is a risk that the product be-
comes too hot.
The product is too hot and can sud-
1
denly stop.
The max. available output is auto-
matically decreased to prevent over-
heating and automatic stop of the
product.
When the indicator for the electronic gear flashes, the
iron button function is engaged.
To stop the product
1. Let the product operate without work load for 2–3
Possible procedure
No procedure is necessary.
No procedure is necessary.
No procedure is necessary.
No procedure is necessary.
Decrease the load or decrease the
temperature of the motor and the
power pack.
Decrease the load or decrease the
temperature of the motor and the
power pack.
Increase the quantity of water or use
colder water to decrease the temper-
ature of the motor.
To decrease the temperature of the
power pack, replace the air filter or
put the power pack in colder ambient
temperature.
WARNING: The drill bit continues to rotate
for some time after the motor stops. Do not
stop the drill bit with your hands. Injuries can
occur.
minutes. The water system decreases the
temperature in the motor.
1320 - 001 - 14.10.2019
Advertenties
Hoofdstukken
Inhoudsopgave
