Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8
reversing the door opening
It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow these
instructions. We recommend you have someone assist you.
fig. 1
fig. 2
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
Note: Before reversing the door swing, unplug the appliance from the mains. Empty
the appliance, including the shelves before reversing the door opening.
• Remove the plastic covering from the top door hinge - fig.1.
• Remove from the right top side the hinge with the three bolts (mind the plastic
parts between the hinge and the door). - fig.2. Remove two bolts from the left
top side.
• Remove the top door by carefully lifting it from the hinge in the middle. Put the
door in a safe place - fig. 3.
• Remove the hinge in the middle on the right side by losening the two bolts.
Remove and fit the white plastic caps from the left side to the right side and
place these where you have removed the middle hinge - fig. 4.
• Carefully remove the bottom door by lifting it from the bottom hinge- fig. 5. Put
the door in a safe place.
• Remove and fit the plastic nog from the right side to the left side.
• Tilt the appliance 45°.
• Remove the front leg on the left side and the two bolts.
• Unscrew the two bolts and remove the bottom hinge - fig. 6. Install the bottom
hinge on the opposite side und replace the bolts in the provided holes.
• Replace the front leg on the right side with the bolts.
• Place the bottom door against the appliance and make sure it is well fitted on the
bottom hinge. Make sure the door is alligned with the outside of the appliance.
• Refit the middle hinge (mind the plastic parts) with the bolts - fig. 7. Make sure
the door is alligned with the outside of the appliance.
• Place the top door against the appliance and make sure it is well fitted on the
middle hinge. Make sure the door is alligned with the outside of the appliance.
• Refit the hinge on the left top side (mind the plastic parts) with the bolts - fig. 8.
Make sure the door is alligned with the outside of the appliance.
• Set the appliance carefully upright.
• Screw the bolts back on the right top side.
• Refit the plastic covering on the top hinge.
unscrew
• Leave the appliance to stand for at least 3 hours before you insert the plug into
the socket.
fig. 7
Middle hinge
fig. 8
19
English
•
Advertenties
Inhoudsopgave
