Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10.
Outputting video signals to a TV
If you want to connect the endoscope to a TV via the AV output, you first need to determine your TV stand-
ard (see chapter "Setting video output format").
Also observe the indications on your TV.
The endoscope enables image output for recording and documentation via an integrated composite video output. The
output socket is on the right of the device. Use the included video cable to establish the connection to your playback
or recording device.
1. Switch on the endoscope.
2. Plug the jack into the video output socket (12) of the endoscope basic device.
3. Connect the cinch plug to the video input of your playback or recording device.
4. Select your TV device's video input.
Also observe the notes in the operating instructions of your playback or recording device.
5. Press the "OK" button at the BS-1000T to call the menu.
6. Use the
/
buttons to move the cursor upwards or downwards and then choose "Video Output" and press
"OK".
7. The camera image is displayed if the video source is correctly connected and chosen.
8. To switch off, press the on/off button (4) briefly. The device and the video output switch off.
By disconnecting the video cable from the BS-1000T or your TV device, the basic device automatically
switches to preview mode.
TV
VIDEO IN
27
Advertenties
Hoofdstukken
Inhoudsopgave
