Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
e) Switching the device on/off
Keep the
button pressed for 3 seconds to switch the endoscope on or off.
After the start-up-screen, the battery charging state and the SD card capacity is briefly displayed on the screen.
Charge the endoscope when the battery level is low. A camera live image is displayed on the screen.
The endoscope is now in preview mode.
f) Camera lighting
To use the endoscope in absolutely dark areas as well, the
BS-1000T has an integrated rotary control for smooth dim-
ming of the LED lighting contained in the camera head.
Turn the controller at the left side of the basic device to in-
crease or reduce brightness.
Set lighting so that the screen image is not too bright or too
dark.
8. Operation
a) Setting the language
1. Press the "OK" button once to call the menu.
2. Use the
/
buttons to move the cursor upwards or downwards and then choose "Sprache" / "LANGUAGE"
/ "Langue" / "Taal" and press "OK".
3. Use the
/
buttons to move the cursor upwards or downwards and to choose the desired language.
4. Press "OK" to save the change and return to preview mode.
b) Setting the date/time
Set the date and time before recording images or videos. The index will be sorted by recording date and time.
1. Press the "OK" button once to call the menu.
2. Use the
/
buttons to move the cursor upwards or downwards and then choose "Date/Time setup" and
press "OK".
3. Enter the correct date and time. Use the
/
buttons to change the value.
4. Switch the date and time display on the screen on or off by setting the "DISPLAY" parameter to "ON" or "OFF".
Time and date indications are always noted on the photos or videos recorded. This parameter only refers
to preview on the monitor.
/
buttons to move the cursor upwards or downwards and use the
-
+
23
Advertenties
Hoofdstukken
Inhoudsopgave
