Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Getting started
The endoscope must only be used for inspection in powered-down systems. The different camera heads
are metal and can lead to short circuit.
a) Inserting the rechargeable battery
1. Slide the battery compartment cover downwards.
2. Insert the battery and connect the two plugs.
3. Close the battery compartment.
The rechargeable battery is located on the back of the endoscope basic device. Do not replace the re-
chargeable battery with another rechargeable battery or any normal battery. Remove the battery if the
endoscope will not be used for any extended period. Make sure that the polarity is correct when replacing
the battery.
b) Charging the battery
1. Connect the plug of the mains unit with the DC input socket.
2. Connect the mains adapter to a mains outlet.
3. The battery is now charged. The endoscope basic device is ready for operation even during the battery charging
process.
Only connect the mains adapter to the mains socket after performing all other connections.
Please observe that the ambience temperature is not less than 0 °C or more than 40 °C while charging.
Battery:Rechargeable
Li-Polymer Battery
(3.7V/2500mAh)
WEEE-Reg.-Nr.:
Model No.BS-1000
DE28001718
MADE IN TAIWAN
21
Advertenties
Hoofdstukken
Inhoudsopgave
