Download Inhoudsopgave Inhoud Print deze pagina

S&P ENERGISAVA 250-C Installatiegids pagina 13

Plafondmontage
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

05
Installation Instructions
SECOND FIX
05
Montagehandleiding
7c. Continued.
The supplied drain connections should
be solvent welded as here. The centre
TWEEDE PUNT
tee section is reversed to make either
LH or RH drain. Check fit before glueing.
7a. Vervolg. De meegeleverde afvoeraan-
sluitingen moeten worden gelast als op
de tekening. Controleer de pasvorm al-
vorens de onderdelen vast te lijmen.
Connect 22mm PVC drain fitting
7d. Drill Ø20mm hole, removing plug and
Verbinding afvoerarmatuur van PVC van
cleaning edges. Push in the supplied
22 mm.
drain fitting and seal as appropriate
7b. Zorg ervoor dat de afvoer waterdicht is
making sure the drain is watertight (See
(Zie pagina 10). De afvoer van de unit
page 10). The drainage from the unit may
be connected to an internal waste water
mag worden verbonden met een intern
system or soil pipe with an appropriate
afvalwatersysteem of met een bodem-
non-return device. One way valve device
leiding. We adviseren een terugslag klep
is recommended. Insulate pipes in an
te plaatsen. Isoleer de leidingen in on-
unheated loft space.
verwarmde lofts.
Important note: The drain must be fitted on
the side of the unit with the pre-drilled pilot
holes. See Fig 7a.
11
Plastic Kap
RH
LH
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
Schuimbehuizing
Links Unit
Belangrijke opmerking: Deze unit is
enkel ontworpen voor montage op het
plafond. Units voor montage op de
8. Reassemble the case assemblies to the
muur moeten afzonderlijk worden
mounting plate. Steps 4, 3, 2, 1.
besteld.
Important note: This unit is for ceiling mount
only. Wall and floor units are configured
differently and should be ordered separately.
Rechts Unit
13

Advertenties

Inhoudsopgave
loading

Inhoudsopgave