Advertenties
Montagehinweise / Mounting information / Consigne de montage / Montagetip
loading permitted and the instructions for mounting! Following installation, the
instructions must be made available to the user.
In case of questions, mor information, uncertainties or if damage occurs, contact the
NORMBAU support service +49 (0) 7843 704 0 or visit us at www.normbau.de.
Load
Max. loading permitted of listed products: 100kg
0300 xxx
0437 xxx
Max. loading permitted of listed products: 125kg
0447 xxx
4447 xxx
With max. length and max. loading permitted, the max. force per fastening is 3kN.
Maintenance
NORMBAU products are not maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Maintenance and cleaning
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Nylon products from NORMBAU have a smooth, high-gloss, easy-to-clean surface.
Dirty parts can be cleaned with a soft, damp cloth or sponge. If heavily soiled, we
recommend a commercially available detergent. Common disinfectants can be used
for wipe disinfection. Acidic cleaning agents, care agents, disinfectants and
decalcifying agents must always be used in accordance with the instructions for use.
An acid content of more than 10% can attack the surface and negatively change the
brilliance and color. Use all agents only diluted, leave to act briefly and rinse off
sufficiently with water. Abrasive, strongly acidic and alcoholic cleaning and care
products should be avoided with Nylon.
More information about
maintenance and cleaning
Disposal
Disposal of the product and packaging is subject to the relevant national regulations
and must be disposed of in the prescribed manner.
2024-03-01 / 8214 136 / I
4300 xxx
4437 xxx
|
10 von 28
NORMBAU
Advertenties
