Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Use
4.4
Cooling mode
Step 1 : Press
to switch on your pump.
Step 2 : Press
to switch from one mode to another until the cooling mode is displayed.
Step 3 : Using buttons
and
select the required temperature.
EXAMPLE :
If the current temperature is 30°C, default setting temperature is 27° required temperature is 15°C.
Current water
Required
temperature
temperature
Useful information about how the cooling mode operates
When the incoming water temperature is greater than or equal to the required temperature
(setpoint temperature) + X°C, the compressor will switch to cooling mode. The compressor will
stop when the temperature of the incoming water is less than or equal to the required temperature
(setpoint temperature).
Indicators for adjustment range X
X : adjustable parameter from 1° to 10°C, default setting is 3°C. (Parameter "H")
14 | EN
Advertenties
Hoofdstukken
Inhoudsopgave
