Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The ice-making cycle
seems normal but no ice is
produced.
Poor ice-making result
TECHNICAL PARAMETERS
Model:
Applicable climate:
Class:
Power source:
Rated power:
Refrigerant/Refrigerant amount:
Net weight:
Gross weight:
Housing:
Unit size (DXWXH)
ENVIRONMENT FRIENDLY DISPOSAL
Do not dispose of the device in normal domestic waste
Dispose of the device over a registered waste disposal firm or through your
communal waste disposal facility. Observe the currently valid regulations.
In case of doubt, consult your waste disposal facility.
2024-01-23 BluMill Ice Cube Maker ManualV02.indd 11
2024-01-23 BluMill Ice Cube Maker ManualV02.indd 11
Possible causes
The ambient temperature
or water temperature is too
high.
Refrigerating system leaks
Refrigerating system
blocks
Poor heat dissipation.
The water temperature is
too high.
The ambient temperature is
too high.
FDZ12-8010
SN/N/ST
I
220-240V/50Hz
110W
R600a/22g
6.1kg
6.7kg
Plastic
303*228*290mm
Solution
Start the ice-making cycle
at a environment with an
ambient temperature less
than 32°C and fill the water
reservior with some cold
water.
Call customer service
Call customer service
Leave an 8-inch clearance
on all sides of the ice ma-
ker for proper ventilation.
Fill the water reservoir with
water ranges between 8°C
and 28°C
Operate the ice maker at a
environment with an ambi-
ent temperature between
10°C and 32°C.
EN
11
20-02-2024 14:29
20-02-2024 14:29
Advertenties
Inhoudsopgave
