Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Cancel settings
Timer and Timed operation settings may be
cancelled at any time.
Cancel Timed operation settings:
l Simultaneously touch and hold the < / >
sensors.
Cancel timer settings:
l Touch the
MENU
Kitchen Timer,
l simultaneously touch the < / > sensors
Change the beep tone
You can change the beep tones as follows:
l Simultaneously touch the < / >, sensors
l Touch
repeatedly to select the ton
MENU
(tone). The display will be flashing:
l Use the < / > sensors to select your pre-
ferred tone:
Use > to select the setting 1 to 3
Use < to select the setting 3 to 1
Adjust display brightness
You can adjust display brightness 1 to 9,
where 1 is the darkest and 9 is the brightest.
The brightness setting applies to an inac-
tive control panel, i.e. when no controls are
touched for 7 seconds.
You can adjust display brightness as follows:
l Simultaneously touch the < / > sensors,
l Touch
repeatedly to select the bri
MENU
(brightness) setting — the settings can
be accessed in sequence ton (tone) and
bri (brightness).
l Use the < / > sensors to select your pre-
ferred brightness:
Use > to select the setting 1 to 9
Use < to select the setting 9 to 1
sensor to select the
Note:
The display is at its brightest setting when
active, i.e. a control was touched within the
last 7 seconds.
Night Mode
The display is dimmed during the night hours
22:00 — 06:00.
Oven door
Oven door must be closed during operation.
If the door remains open for more than 60
seconds and the function knob is in a posi-
tion other than "0", you will hear a beep to
alert you that the door must be closed. The
following message will be shown
Touch any sensor or close the oven door to
mute the beeping.
Limit the operating time
For safety reasons, the oven operation is
time limited.
If there is no delayed timed heating function
set and you have not turned the function
knob, the appliance will turn off after 10 hours
of operation.
15
.
Advertenties
Hoofdstukken
Inhoudsopgave
