Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Electronic programmer
— select the mode of operation
MENU
>
— higher setting sensor
<
— lower setting sensor
— appliance on indicator
— Kitchen timer
— Duration
Set and adjust the current time - Power
On mode
When the appliance is plugged into the elec-
trical mains supply, or when power is restored
after power outage, the digital display will
show flashing 0.00
l Touch and hold down the
simultaneously touch and hold < / > until
you hear a beep and the
shown on the display. The dot under the
symbol will start to flash.
l Touch < / > within 7 seconds to set the
current time.
To store the new time setting, wait approxi-
mately 7 seconds after time has been set.
The dot below the
You can adjust the time later. To do this touch
< / > simultaneously and adjust the current
time while the dot below the
flashing.
sensor or
MENU
symbol is
symbol will stop flashing.
symbol is
Note:
The oven can be turned on when you see the
symbol on the display.
Standby mode
In this mode, the current time, minute mind-
er, timed operation or delayed timed opera-
tion status is displayed. Touch
through available menu items. Available
items:
MENU
•
Set Minute Minder
•
Set Duration
•
Set End Time
•
Set OpenUp! (opens the door automati-
cally)
•
Standby
Kitchen Timer
You can active the Kitchen Timer at any time,
regardless of the status of other functions.
The Kitchen Timer can be set from 1 minute
up to 23 hours and 59 minutes.
To set the Kitchen Timer:
l touch
, then the display will show
MENU
blinking :
l use the < / >, sensors to set the Kitchen
Timer. The display will show the set time
and Kitchen Timer symbol
set time elapses, alarm sounds and the
icon flashes,
l Touch and hold
touch and hold < / > to mute the alarm,
the
will be off and the display will show
the current time.
Note!
If no button is touched, alarm will turn off
automatically after approximately 7 minutes.
13
to cycle
MENU
. Once the
or simultaneously
MENU
Advertenties
Hoofdstukken
Inhoudsopgave
