Advertenties
Beschikbare talen
Beschikbare talen
ERRORS
Problem
Cloudy stains on the
glassware.
Yellow or brown scale
on the inside of the
tub.
White scale on the
inside of the tub.
Dishwasher detergent
is left in the detergent
compartment.
Steam.
Black or grey stains on
the dishes.
Water remains under
the filters.
The dishwasher is
leaking.
Water not pumped
from the dishwasher.
Error code E1
Error code E3
Error code E4
Error code E8
Error code Ec
Error code Ed
EN 26
Potential causes
Combination of soft water and
too much detergent.
Traces of iron in the water
may cause spotting to the tub
of the dishwasher.
Hard water.
The detergent compartment is
blocked by dishes.
When opening the door.
Aluminium cooking utensils
have scraped the dishes.
This is normal.
Rinse agent reservoir too full
or rinse agent is leaking.
The dishwasher is not
standing level.
Twisted or trapped drain hose. Check the drain hose.
Filter clogged.
Kitchen sink clogged.
Water intake time is too long.
Not reaching required
temperature.
Overflow.
Failure of orientation of
distributary valve.
Washing control system fail.
Failure of communication
between main PCB with
display pcb.
Solution
Use less detergent and choose the
glass cycle, which you can use to
clean glassware.
Contact a manufacturer of water
softeners for a special filter.
Increase salt consumption setting.
Load the baskets so that the dishes
no longer block the detergent
compartment. Clean the upper spray
arm.
This is possible at the end of the
cycle.
Aluminium can tarnish.
A small amount of water around the
drain on the rear of the tub base
keeps the seal flexible.
Take care not to overfill the rinse
agent reservoir. Spilled rinse agent
can lead to foam/flooding. Wipe up
spilled rinse agent with a damp cloth.
Adjust the dishwasher so that it is
standing level.
Check the filter system
Check the kitchen sink to make sure
it is draining well. If the problem is
the kitchen sink that is not draining,
you may need a plumber rather than
a serviceman for dishwashers.
Faucets is not opened, or water
intake is restricted, or water pressure
is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary
valve.
PCB or motor fail.
An open circuit or break in wiring for
the communication.
Advertenties
