Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
chapter – "Removing / Inserting the
Dust Container").
Cleaning the Motor Unit, Extension
Tube and Nozzles
•
Wipe down the motor unit (E),
extension tube (G) and nozzles with a
damp, soft cloth if necessary.
Then dry with a soft cloth.
•
Regularly remove hair and fl uff from
the nozzles and brushes.
Cleaning the Microfi bre Floor Nozzle
To make it easier to clean, the roller
can be taken out of the microfi bre fl oor
nozzle (J):
1. Release the locking catch on the
back of the microfi bre fl oor nozzle by
pressing the catch on the right side
towards the
can now be slid upwards.
2. Pull out the roller and remove any dirt.
3. Reinsert the roller so that the locking
lugs of the cover engage in one
another. You must hear and feel them
engage.
Storage
•
Store the device in a cool, dry place
which is protected from direct sunlight
and is out of the reach of children and
animals.
•
For storage, hang the device with the
suction opening (10) facing down wards
in the vacuum cleaner holder (B).
•
Nozzles can be stored on the con-
necting piece (D) and on the bottom of
the vacuum cleaner holder. The base
plate (K) is suitable as a rest for the
fl oor nozzle (J).
If the device is not going to be
used for a prolonged period,
remove the battery (C) to be on
the safe side (see "Charging Up
the Battery").
20
symbol. The side cover
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps listed, contact the
customer service department.
Do not attempt to repair an elec-
trical device yourself!
The device only works slowly or does
not start.
The battery (C) is empty.
► Charge up the battery.
Low suction force.
The battery (C) is too weak.
► Charge up the battery.
The dust container (3) is too full.
► Empty the dust container.
The fi lters are dirty.
► Clean the filters.
The suction opening (10) is blocked.
► Switch off the device and remove the
blockage.
Particles which are too large or heavy may
stick to a fi tted carpet.
► Remove these foreign objects by hand.
Dust escapes from the device during
cleaning.
The dust container (3) or fi lter are not
fi tted correctly.
► Correct the fit of the dust container
and filter. Make sure that the dust
container is closed.
The fi lters are dirty.
► Clean the filters.
The fi lters are worn or damaged.
► Replace the filters.
Advertenties
Hoofdstukken
Inhoudsopgave
