Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LED Power Control Cordless Cyclone Vacuum Cleaner
connect the mains adapter to a plug
socket. The charge control lamp on the
battery fl ashes red or
display (6) fl ashes and the battery
status display (12) indicates the charge
status in %. The battery is charging.
The battery can also be charged
while the device is in the base
station (see the "Charging the
Battery via the Base Station"
section). The base station has a
connecting socket for the mains
adapter.
•
If the charge control lamp fl ashes
green or the battery status display
shows 100, the battery is fully charged.
The touch display switches off ap-
prox. 10 minutes after the battery
is fully charged.
•
First disconnect the mains adapter from
the mains power and then dis connect
the barrel connector from the battery.
Charging the Battery via the Base
Station
•
Place the base station on a dry, even
and fi rm surface.
•
Hang the vacuum cleaner into the
vacuum cleaner holder (B) with the
suction opening facing downwards
(Picture E).
•
To charge the battery, connect the
mains adapter (H) of the vacuum
cleaner to the connecting socket on
the vacuum cleaner holder.
ACCESSORIES
•
The microfi bre fl oor nozzle (J) is suit-
able for both carpets and hard fl oors.
It has a rotating microfi bre roller and
is thus particularly suitable for delicate
fl oor surfaces. The LEDs illuminate
dark areas, to allow even more
thorough cleaning.
•
on the touch
•
•
•
ASSEMBLY
Attaching / Detaching the Microfi bre
Floor Nozzle and Extension Tube
•
•
The combi nozzle (I) is a combination
of a small crevice nozzle and brush
nozzle. Press the release button on the
brush attachment and slide it upwards
at the same time to turn the crevice
nozzle into a brush nozzle (Picture D).
The brush attachment must be heard
to engage in place:
○ The crevice nozzle is suitable for
upholstery, cleaning the inside of
cars and for all nooks and crannies.
○ The brush nozzle is used for
vacuuming upholstery and textiles
and for removing dust from delicate
objects such as picture frames, lamp
shades, keyboards, books etc.
The long crevice nozzle (F) is suitable
for places which are hard to get to,
such as corners, crevices or recesses.
The LEDs illuminate dark areas, to
allow even more thorough cleaning.
The extension tube (G) makes it
easier to reach the tops of cupboards,
ceilings and corners and, along with
the microfi bre fl oor nozzle, allows
fl oors to be cleaned.
The base station (A,B,D,K) is suitable
for storing the device in a space-
saving manner. The integrated holder
is suitable for securing the nozzles
easily so as to save space.
Attaching: The microfi bre fl oor
nozzle (J) and the extension tube (G)
are plugged directly onto the suction
opening (10). You must hear them
engage. Attach the microfi bre fl oor
nozzle to the extension tube in the
same way.
Detaching: Press the release button (11)
over the suction opening or on the
extension tube and pull out the
microfi bre fl oor nozzle or the extension
tube at the same time.
EN
17
Advertenties
Hoofdstukken
Inhoudsopgave
