Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LANGUAGE SETTING
The menu of the radio can be configured to various languages.
1.
Press the On/Off button to switch on the radio.
2.
Press the MENU button, and then the TUNING
3.
Press the SELECT-INFO button; then the TUNING
4.
Press the SELECT-INFO button; then the TUNING
is English).
5.
Press the SELECT-INFO button to confirm your choice.
6.
The display menu will then change to the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view the software version in DAB and FM mode.
1.
Press the On/Off button to switch on the radio.
2.
Press the SOURCE button to select FM or DAB mode.
3.
Press the MENU button, and then TUNING
4.
Press the SELECT-INFO button; then the TUNING
5.
Press the SELECT-INFO button to view the software version.
6.
Press the MENU button to return to the normal radio display.
Note: USB socket next to the battery compartment is for upgrading the software of the device if needed.
21
or
buttons until the display shows "System".
or
buttons until the display shows "Language".
or
button until the desired language appears on the display (default
or
button until the display shows "System".
or
button until the display shows "SW Version".
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1.
Press the On/Off button to switch on the radio.
2.
Press the MENU button, and then TUNING
or
3.
Press the SELECT-INFO button; then the TUNING
4.
Press the SELECT-INFO button; "Reset? <No> Yes" displayed.
5.
Press the TUNING
or
button to select "Yes" if you wish to reset the radio, otherwise, select "No" .
6.
Press the SELECT-INFO button to confirm your choice.
7. A full reset will be performed. All presets and the station list will be erased. All settings will be set to the default values. The radio
will start up and the display will show "WELCOME" for a few seconds. Then the radio will automatically perform an auto scan of
the Band III DAB channels and the FM band. The display will show "Scanning" in DAB and "Auto" in FM.
8.
When the scan is completed, the 10 strongest FM stations will be stored as presets. The radio will switch to standby with the
updated clock and date showing on the display.
In case of malfunction due to electrostatic discharge; reset the product as above to resume normal operation. If you are not able to
perform the reset operation as above, remove and reconnect all batteries and the power supply.
KEY LOCK
The radio supports Key Lock function in all the Standby, DAB, FM, Bluetooth and Aux-in modes.
1.
Pressed and hold SOURCE button for about 3 seconds, the LCD will display "Locked".
2. When keys are locked, the functions of the radio will be temporary disabled until it has been unlocked. During this moment, the
radio would only brighten the backlight for a few seconds and showing "Locked" in display.
3.
Pressed and hold the SOURCE button for 3 seconds again, the radio would display "Unlocked", and the key lock function will
be disabled.
Noted: When the radio is in standby and powered by batteries, some of the buttons were not be able to brighten the radio's backlight
in order to save energy.
button until the display shows "System".
or
button until the display shows "Reset".
GB
G B
22
Advertenties
Hoofdstukken
Inhoudsopgave
