Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Group controller
If the UC52 is used as a group controller, other group controllers/drive control-
lers can be controlled. This control can relay external switching signals.
This function can be used to connect groups and carry out joint switching com-
mands. The coding switch 2 must be in the upper position.
Roller shutter/awning or venetian blind setting
Roller shutter or awning mode (down) or venetian blind mode (up) can be set
using the encoding switch 3.
Functions in manual mode
• UP, STOP, DOWN
• Intermediate position
• Ventilation/adjustment position
• Emergency signals
Functions in automatic mode
• External automatic drive commands
• UP, STOP, DOWN
• Intermediate position
• Ventilation/adjustment position
• Emergency signals
Moving to reverse position (venetian blind)
When the venetian blind function is being used, the blind moves in non-main-
tained command mode in order to allow the slats to be positioned more pre-
cisely. If you press and hold a control button for longer than 1 second, the blind
will remain locked.
After the programmed intermediate position has been reached, the slats will be
automatically adjusted (provided the reverse position has been programmed).
Settings
Functions
de
en
fr
nl
23
Advertenties
Inhoudsopgave
